Hitachi VM-3200E Instruction Manual page 17

a MANUAL FOCUSING
. Set AUTO/MAN FOCUS switch to "MAN" position.
3. Focus on the object by turning the focus ring..
Focus Ring
=
NOTE: If focusing is performed without zooming up
first, the picture may become out of focus when the
zoom-up is done during actual picture taking.
4. Then, zoom back the object as desired.
Far Object Zoom Up Focused Zoom Back
@ MACRO FOCUS
It permits you to shoot objects as close as 1 cm from
the lens tip.
1. Set AUTO/MAN FOCUS switch to "MAN" position.
2. Turn the zoom lever to ''MACRO" while pressing
MACRO switch.
3. Turn the zoom ring within the "MACRO" range
(green line on the zoom ring) for focusing.
Zoom Ring
MACRO Switch
AUTO/MAN FOCUS Switch
USING THE POWER ZOOM FEATURE
Power Zoom Switch
14