Trunked Operation; Trunking Format - Kenwood TK-780 Series Instruction Manual

TRUNKING FORMAT
\
TRUNKED OPERATION
3 Ifatone does not sound, communication is possible; start speaking into
the microphone. Release the PTT switch to receive.
e For best sound quality at the receiving station, hold the microphone eee
approximately 1.5 inches (3 ~ 4 cm) from your mouth.
4 When your conversation is finished, return the microphone to its hanger. ©
a. Receiving a Dispatch Call.
"4 Select the desired system-and group: using the System:and Group. keys.
(If the Scan function has been programmed, you can'switch it ON or OFF
_as desired.)
pu
2 When you hear the dispatcher's voice, rasidiuiek the volume as necessary.
m@ Placing a Telephone Call
Note: You can only make a telephone call if the telephone service is available and you have an
optional keypad microphone.
Refer to "MAKING A DTMF CALL" on page 17. Consult your dealer
for further details.
1 Select the desired system and group using the System and Group keys.
2 Press and hold the PTT switch for approximately 1 second to ensure a'
connection.
. ° 'Confirm that there is a dial tone after releasing the PTT switch.
3 Dial using the microphone keypad.
e. After.dialing, wait.for a response. from the.called party.
4 When the called party responds, press the PTT switch and speak into the
microphone.
Release the PTT switch to receive.
PORRAMEY PATES 22 8 Ee
* Only one person can speak.at a time.