Figure 29. Removing the speakers for ultralight
Figure 30. Removing the speakers for ultralight
Steps
1. Unroute the antenna cables from the routing guide.
2. Disconnect the speaker cable from the connector on the I/O daughterboard.
3. Peel the tape that secures the speaker cable to the palm-rest and keyboard assembly.
4. Note the speaker cable routing, and unroute the speaker cable from the routing guides on the palm-rest and keyboard
assembly.
5. Lift the speakers, along with the cable, off the palm-rest and keyboard assembly.
60
Removing and installing Customer Replaceable Units (CRUs)