Dell P175G Owner's Manual page 50
Hide thumbs
Also See for P175G:
- Setup and specifications (32 pages) ,
- Service manual (94 pages) ,
- Setup and specifications (36 pages)
Table of Contents
Advertisement
Figure 17. Removing the base cover
Figure 18. Removing the base cover
Steps
1. Loosen the eight captive screws that secure the base cover to the palm-rest and keyboard assembly.
2. Using a plastic scribe, pry open the base cover starting from the recesses, which are located in the U-shaped indents at the
top edge of the base cover, near the hinges.
CAUTION:
Do not slide the scribe through the edge of the top side of the base cover as it damages the
latches inside the base cover.
CAUTION:
Do not pry upwards from the edge near the vents, at the top side of the base cover, as it damages
the base cover.
3. Pry open the top side of the base cover and continue working on the left, right and, bottom sides to open the base cover.
4. Lift the base cover from the left and right sides and remove the base cover off the palm-rest and keyboard assembly.
50
Removing and installing Customer Replaceable Units (CRUs)
Advertisement
Table of Contents
