Table of Contents
Advertisement
1
1 [Receiver] menu
Band: Specifies the frequency band to use.
Note
This function is not supported by the DWR-R01D and
DWR-R02D.
GP/CH: Displays the frequency group and channel
configured for the receiver channel.
Frequency: Displays the frequency configured for the
receiver channel.
...: Press this button to display the [Group/Channel
Setting] dialog box. You can select the reception
frequency from the channel plan configured for the
receiver in the [Group/Channel Setting] dialog box.
Active Channel Scan: Press this button to execute the
receiver's active channel scan function. You can select the
channel for receiving from the detected channels.
Clear Channel Scan: Press this button to execute the
receiver's clear channel scan function. You can select the
2
channel for receiving from the detected channels.
Encryption: Configure settings for the receiver's
encrypted communication function.
Codec mode: Configure settings for the receiver's codec
mode.
Note
This function is not supported by the DWR-R01D and
DWR-R02D.
BAL Out Level: Configure settings for the receiver's
analog audio output level.
UNBAL Out ATT: Configure attenuator settings for the
3
UNBALANCED OUTPUT 1/2 connector.
Note
This function is not supported on the DWR-R01D.
Ground Lift: Configure whether to connect the
GROUND (XLR 1 pin) of the BALANCED OUTPUT 1/2
connector to a chassis GROUND. You can avoid hum,
buzz, and other noise caused by GROUND LOOP by
selecting [LIFT] to lift GROUND (XLR 1 pin) from the
chassis GROUND.
Note
This function is not supported on the DWR-R01D.
AF Output: Controls the audio output for the receiver
channel. When [MUTING] is selected, audio output
muting will be enabled for the respective receiver channel.
While muting is enabled, the "muting" indicator on the
AF/PEAK level meter will blink red. When
[UNMUTING] is selected, audio output muting will be
disabled for the respective receiver channel.
Note
This function is available under the following conditions.
DWR-R01D: Version 1.26 or later
DWR-R02D: Version 1.06 or later
46
Advertisement
Table of Contents
