Table of Contents
Advertisement
Pairing Receiver Channels and
Transmitters
To enable remote control of transmitters via wireless
remote control, each receiver channel must be paired with
a transmitter.
By using the pairing wizard in Wireless Studio to perform
this operation, you can perform pairing for multiple
channels with ease.
Perform pairing with the pairing wizard as follows.
1
Place a check mark next to [Online monitoring and
control] in the Device menu.
The system enters online mode, and the receivers and
RMU-01 units are automatically detected and added to
the device list window.
2
Select [Device] menu > [Pairing wizard].
The following screen appears, and the pairing wizard
starts.
3
Click [Next >].
The following screen appears.
The receiver channels for all the receivers that appear
in the device list appear here.
4
Select the receiver channel for pairing, and click
[Next >].
The following screen appears.
5
Operate the transmitter for pairing to set it to pairing
mode, and click [Next >].
When the transmitter is detected, the following screen
appears.
18
Advertisement
Table of Contents
