Table of Contents
Advertisement
• Right-click the meter icons that appear in the simple
status viewer, and select [Property] in the context
menu that appears.
3
Configure the settings in the [Property] window.
Changes to the settings are sent to receiver channels
and transmitters immediately and applied.
For details on the settings in the [Property] window, see
"[Property] Window" on page 44.
Controlling devices from the [Property
List] tab of the sub window
Perform the following to control devices from the
[Property List] tab of the sub window.
1
Place a check mark next to [Online monitoring and
control] in the [Device] menu.
The system enters online mode, and the receivers are
automatically detected and added to the device list
window.
2
Click the [Property List] tab in the sub window.
The [Property List] tab appears.
Receiver channels that are registered to the status
viewer appear in the [Property List] tab.
If the receiver channel for which you want to configure
settings does not appear in the [Property List] tab,
display the page on which the receiver channel is
registered in the status viewer, or register the receiver
channel to the status viewer.
For details on changing the page displayed in the
status viewer, see "Status Viewer and Meter Icons" on
page 29.
For details on how to register receiver channels to the
status viewer, see "To monitor a particular set of
receiver channels" on page 15.
3
Click a cell displayed in the list of setting values in the
[Property List] tab, and configure the setting.
Changes to the settings are sent to receivers and
transmitters immediately and applied.
For details on the settings in the [Property List] tab
and how to change them, see "[Property List] Tab" on
page 33.
Recording the Signal Environment
during Operation
You can use the [RF Chart Grapher] in Wireless Studio to
record information on the signal environment and any
alerts that occurred during operation. This allows you to
determine the cause-and-effect relationship between the
signal environment and specific alerts.
20
Advertisement
Table of Contents
