Changing The Storage Batteries; Replacing The Operating Panel - Electrolux RCB 24 P Maintenance And Repair Manual

EIA | | CHANGING THE STORAGE BATTERIES | |
© Unscrew the two screws (1) on the cover
© Push the cover (2) upwards a little.
© Remove the cover (2).
© Take out the storage battery casing (3).
© Remove the screw (4).
0 Pull the two halves of the casing apart and remove
the old batteries.
ο Insert four new batteries (5) into the casing,
making sure that the polarity is correct.
INCORRECT CONNECTION OF TERMINALS
CAN CAUSE DAMAGE TO THE CONTROL BOARD !
ο Reassembly is in reverse order.
REPLACING THE OPERATING PANEL
ο Remove the cover (chapter 16).
© Remove the four screws (1) on the cover plate.
© Disconnect the battery cable plug connection (3) before
removing the cover plate (2).
© Remove the four screws (4) on the operating panel.
© Disconnect the plug (5) from the connection strip X102 on
the control board.
Installation of a new operating panel is in reverse order.
-13-