Table of Contents
Advertisement
TROUBLESHOOTING
General
e
Volume is turned all the way down.
Speaker cords are disconnected.
@
Speaker cords are connected with vinyl
insulation still on.
Function is not set to the desired listening
source.
Plug power cord into wall socket.
e
e
Raise volume setting.
@
Connect speaker cords correctly.
No sound from speakers.
One of the speaker cords is disconnected
Connect correctly or replace with new cord,
or damaged.
Sound
from
only
one
speaker.
Turn off TV.
e
Move TV away until interference stops.
TV is on.
The unit is too close to TV.
Strange sounds heard (or
recorded from) tape, CD or
radio.
Tuner
No AM reception.
Loop antenna not connected.
Connect loop antenna correctly.
Wrong radio band.
Set to desired radio band.
Station not tuned in.
Tune in station.
Beat noise heard.
TV is on.
e
Turn off TV or move TV away.
Loop antenna position bad.
Change loop antenna position.
Noise heard.
interference from nearby fluorescent
light,
Stop using device causing interference.
hair dryer, or other electrical appliance.
Sound is distorted.
Antenna in poor position.
Change antenna position.
Broadcast is weak.
Use external antenna.
Interference from other electrical devices
Change antenna position.
or multipath reception.
There is no stereo sound.
Broadcast signal is weak, antenna input is
Change to a multielement external antenna.
insufficient.
The FM MONO button is turned on.
Press FM MONO so that the MONO indicator
goes out.
Clock and Timer
No time indication.
Set time again.
Set time again.
There was 2 power outage.
AC plug was pulled out.
e
Set current time.
e
Set ON and OFF times.
e® Touse timer, press WAKE UP {(-) or REC (+) 50
that the timer display lights.
® Set ONand OFF times having and interval of
1 minute or more.
Current time is not set.
Stan and/or stop time is not set.
Timer is not on.
Timer does not work.
e
ONtimeand OFF timeare setatthe same
time.
114
<ARE1262>
Advertisement
Table of Contents
