Operation To Reset - Kenwood DP-J1070 Instruction Manual

DP-J1070/J685 (En)
Operation to reset
Unplug the power cord from the power socket and,
The microcomputer may fall into malfunction (impossibility to operate, : u
erroneous display, etc.) when the power cord is unplugged while while holding the STOP key depressed, plug the power
power is ON or due to an external factor. In this case, execute the
ae
method to reset the microcomputer and return it to normal
« Please note that restarting the microcomputer clears the contents
a:
stored in it and returns it to the condition when it left the factory.
cord into the socket again.
PAA EARL PVE nA ARCELOR RR FA CTO SH of Fafa
CD player
No power is applied with the POWER switch | ¢ Power piug is loosely connected.
ON. e With the power plug connected to the switched
AC outlet of anamplifier, the power of the amplifier
is turned off.
e Insert the power plug firmly to the AC outlet.
¢ Turn the amplifier's power ON.
¢ Load the disc again with its label side up.
e Insert disc properly.
e Wipe off the dust on the surface of the disc
referring to "Disc handling precautions." +(2@)
* Replace the disc with a new one.
* Leave the player for about 1 hour so that the
condensation is removed. -
* Disc is loaded upside down.
¢ Disc is loose.
e Disc is dirty.
Disc is loaded, player does not play.
* Disc is cracked.
* Condensation occured on the optical lens unit.
e Disc is not loaded. ¢ Load a disc and press the »/H key.
¢ Press the b/H key, ¢ Play modeis not entered (The play/pause indicator
is not lit).
¢ Disc ts too dirty.
* Wipe off the dust on the disc surface referring
to "Disc handling precautions". ~2a
¢ Replace the disc with a new one.
e Connect all connection cords firmly.
e Disc is cracked.
* The connection cords are inserted loosely.
* Wipe off the dust on the disc surface referring
to "Disc handing precautions'. (28)
* Replace the disc with a new one. ~
* Tryselectinga place where no strong vibrations
occur by changing the installation place, etc.
Music is interrupted. (Sound is skipped.} ® Disc is too dirty.
® Disc is cracked.
* Oscillation is applied to this unit.
* To avoid disc playing automatically, remove
disc before switching off power.
* The CD player will automatically play when a disc
Disc begins to play when power is switched
has been inserted and power is switched ON.
ON.