Kenwood DP-J1070 Instruction Manual page 21

ms
pacts
The CD contents are edited as follows.
© The input tape recording time is divided by two, and tracks that
can be accommodated in file A (which refers to tracks on tape
side A) are selected in order of their track Nos.
DP-J1070/J695 (En)
To record an edited program
The CCRS recording function may be used by connecting the CD player &
to any KENWOOD cassette deck with an '(XS]" or "CXSBI mark, using =
a system control cord. i
For details please refer to "Recording of CD playback" section in your cE
cassette deck instruction manual. ;
@ In a few seconds, the time left on tape side A is displayed, then
file B (tracks on tape side B) is edited in the same manner.
« After editing, the "EDIT" indicator changes from blinking to steady
lighting.
« The tracks in file side A are played in sequence, after which the player
pauses at the beginning of file side B. Press the »/t key again to start
playing file side B tracks.
¢ Playback stops after having played the B file.
* All of the editing contents are cleared.
or the last track on side A or side B may be cut short.
2. Up to a maximum of 32 tracks can be edited using this function.
3. The EDIT function may not operate properly for discs having only one track or having tracks of jong duration such as classical music.