Table of Contents
Advertisement
en-us Cleaning and maintenance
Slide a sufficiently large container under the opening.
6.
Take the drain hose out of the holder.
7.
8.
CAUTION When you wash at high temperatures,
the detergent solution becomes hot.
Do not touch the hot detergent solution.
▶
To allow the detergent solution to flow out into the
container, remove the sealing cap.
30
Firmly press on the sealing cap.
9.
Clip the drain hose into the holder.
10.
Cleaning the drain pump
Requirement: The drain pump is empty. → Page 29
Since water may remain in the drain pump, unscrew the
1.
pump cap carefully.
The filter insert in the pump housing may become
‒
stuck due to coarse particles of dirt. Loosen the dirt
and remove the filter insert.
The pump cap is comprised of two parts which can be
taken apart for cleaning.
Advertisement
Table of Contents
