Pentax SF1 Manual page 7

OUTLINE OF OPERATIONS
1. Set the desired exposure mode by
sliding the select switch to the UP
or DOWN position while holding
the mode/drive switch at the
mode position, (pages 7 & 14-^
25)
2
,
Set the focus mode switch at the
SINGLE position, (page 29)
When you press the shutter
release button halfway down,
the auto-focusing mechanism is
activated and the lens starts
moving, (pages 30^35)
3
.
Position the subject within the
viewfinder's focus frame [[ ]].
If the green in-focus signal [
o]
at the bottom of the viewfinder
lights up when you press the
shutter release button halfway
down, the subject is in focus,
(pages 30^35)
• After shooting the designated number of frames,
rewind the film into its cartridge and take it to a photo
service for development as soon as possible, (pages 36
&37)
3
#