Table of Contents
Advertisement
mat:
DRIVE MODE AMI
»CUSING MODE
Drive Modes
To set a drive mode, siide the select switch to the UP or
DOWN position while pressing the mode/drive switch to
the DRIVE position until the mark representing the
desired mode appears on the CENTIC panel. If the select
switch is held at one position, the marks will change
continuously.
[Ci)] " Self-timer mark (see page 49.)
IM]
- Single advance
When you press the shutter release button,
the motor drive advances the film to the next
frame and stops.
[%] - Consecutive advance
As long as you hold the shutter release button
down, the motor drive keeps advancing the film
at a speed of approx. 1.8 frames per second.
Focusing Modes
Auto-Focus (AF) Modes
O AF SINGLE
Focusing continues until the subject is captured in
focus. The shutter can then be released.
e
AFSERVO
If the subject moves, the camera continues focusing
on it. The shutter can be released anytime, even if
the subject is not in focus.
Manual Focus Mode
O MANUAL
Push up the focus-mode switch while pressing the
manual-focus button. Focusing can be done manually
with the assistance of the FI (Focus Indication)
system.
29
#
Advertisement
Table of Contents
