Yamaha AG200FEM 2021 Owner's Manual page 69

5 4
1. Brake torque rod
2. Nut
3. Bolt
4. Cotter pin
5. Brake shoe plate
2. Remove the brake pedal free play
adjusting nut, and then disconnect
the brake rod from the brake cam-
shaft lever.
4
3
1
2
2
1
3
1. Wheel axle
2. Drive chain slack adjusting plate
3. Brake camshaft lever
4. Brake pedal free play adjusting nut
5. Brake rod
3. Loosen the axle nut and the rear
sprocket nut.
Periodic maintenance and adjustment
5
7-35
2
1
3
1. Axle nut
2. Rear sprocket nut
3. Drive chain slack adjusting plate
4. Lift the rear wheel off the ground
according to the procedure on
page 7-32.
5. Turn the drive chain slack adjust-
ing plate on each side of the
swingarm fully in direction (a).
6. Remove the axle nut.
7. Pull the wheel axle out together
with the drive chain slack adjusting
plate from the right side, and then
remove the collar.
8. Slide the wheel to the right, and
then remove it by pulling it back.
1
2
(a)
3
4
5
6
7
8
9
10
11
12