Yamaha AG200FEM 2021 Owner's Manual page 54

Periodic maintenance and adjustment
1
2
3
(a)
1
2
4
(b)
1. Brake pedal height locknut
5
2. Brake pedal height adjusting bolt
3. Brake pedal height
6
3. Tighten the locknut.
7
WARNING
After adjusting the brake pedal
8
height, the brake pedal free play
must be adjusted.
9
10
11
12
Brake pedal free play
3
1. Brake pedal free play
Measure the brake pedal free play as
shown.
EWA11232
Brake pedal free play:
20.0–30.0 mm (0.79–1.18 in)
Periodically check the brake pedal free
play and, if necessary, adjust it as fol-
lows.
To increase the brake pedal free play,
turn the brake pedal free play adjusting
nut at the brake rod in direction (a). To
decrease the brake pedal free play,
turn the adjusting nut in direction (b).
1
1. Brake pedal free play adjusting nut
2. Brake rod



7-20
(a)
1
(b)
2
WARNING
After adjusting the drive chain
slack or removing and installing
the rear wheel, always check the
brake pedal free play.
If proper adjustment cannot be
obtained as described, have a
Yamaha dealer make this ad-
justment.
After adjusting the brake pedal
free play, check the operation of
the brake light.
EWA10681