Cleaning The Cup Rim Sensor - Miele CVA 7440 Operating And Installation Instructions

Cleaning and care
Cleaning the central spout
Clean the central spout stainless
steel cover by hand only using warm
water and a little washing-up liquid.
 Clean all parts thoroughly by hand.
Useful tip: To clean the components of
the central spout particularly
thoroughly, clean them occasionally in
the dishwasher (Exception: stainless
steel cover). This will remove coffee
deposits and milk residues effectively.
 Clean the area surrounding the
central spout with a damp cloth.
58
Fitting the central spout
The dispensing unit is easier to
reassemble if the individual parts are
dampened with water beforehand.
Make sure that all parts are tightly
connected to one another.
 Reassemble the dispensing unit.
 Press firmly to connect the
dispensing spouts correctly to the
holder.
 Insert the dispensing unit in the
coffee machine.
 Connect the milk pipework.
 Refit the stainless steel cover.
 Close the appliance door.
Fit cover to central spout
display.
 Confirm with OK.

Cleaning the cup rim sensor

Clean the cup rim sensor at least once
a week and more often if heavily soiled.
The cup rim sensor is located
underneath the central spout.
appears in the