Table of Contents
Advertisement
Cleaning and care
Cleaning the central spout
Clean the central spout's stainless
steel cover by hand only using a mild
solution of warm water and liquid
dish soap.
Clean all parts thoroughly by hand.
Tip: With the exception of the stainless
steel cover, all parts of the central spout
should be cleaned in the dishwasher
from time to time to give them a
thorough clean. This will remove coffee
deposits and milk residues effectively.
Clean the area around the central
spout with a damp cloth.
Inserting the central spout
The dispensing unit is easier to
reassemble if the individual parts are
dampened with water beforehand.
Make sure that all parts are tightly
connected to one another.
Reassemble the dispensing unit.
Press down firmly so that the spouts
become securely connected to the
holder.
68
Slide the dispensing unit into the
coffee machine.
Connect the milk pipework.
Reinstall the stainless steel cover.
Close the appliance door.
Fit cover to main dispenser
display.
Confirm with OK.
Cleaning the cup rim sensor
Clean the cup rim sensor at least once
a week and more often if heavily soiled.
The cup rim sensor is located under the
central spout.
Press the two catches together (see
arrows).
appears in the
Advertisement
Table of Contents
