Table of Contents
Advertisement
ENGLISH
mode will appear in large letters in the
front panel display, and in a two line
reminder on the video screen. Once the
selection is made, the mode will continue
to appear in a smaller indictor at the bot-
tom of the front panel display.
From the remote, modes may be selected
by simply pressing the button that corre-
sponds to the desired mode.
Modes may also be selected using the on
screen display. Press SELECT @ on
the remote to display the MAIN MENU.
Then press W ¥ twice so that the on
screen cursor is next to
SURROUND
MODE. Press SELECT @ again to
move to the next menu.
Atthe SURROUND
MODE
MENU,
press the <q or > buttons qf until the
desired mode name appears on the
screen. Press W twice unti! the > cursor
is next to RETURN TO MAIN MENU
and press SELECT. At the main menu
select MENU OFF and press SELECT
to exit the menus.
:
Basic Operation
20
A different mode may be selected for
audio and video sources. Once a mode
has been selected, it will be attached to
those sources in memory. Thus, you may
select THX CINEMA as the mode for
video and HALL
SURROUND for
audio. After the initial selections are
made, the unit will automatically return
to your preferred mode for each type of
input whenever it is chosen.
TV Auto Function
With the increasing sophistication of
today's home entertainment systems, it
often takes numerous remote controls to
turn a system on. This product's unique
"TY Auto" feature simplifies that task
and greatly reduces the actions needed to
bring your entire system to life.
If a video feed is connected to the TV
VIDEO IN jacks [XJ during the installa-
tion, the signal at that jack is used to
trigger system turn on. Even when the
unit is turned off, the presence of a video
signal at the TV VIDEO jacks will auto-
matically cause it to turn on. As long as
the signal is present, the unit will remain
on. When the TV or other source is
turned off, it will automatically return to
a standby ("off") mode within five min-
utes.
Note that if the unit is turned on auto-
matically by this function, it will remain
on if another source is subsequently
selected. In that case, it must be turned
off manually even if the TV source is
turned off.
Advertisement
Table of Contents
