Table of Contents
Advertisement
PERIODIC REPLACEMENT OF PARTS
To ensure safe operation, be sure to conduct periodic
inspection of the machine. In addition, the parts listed below,
if defective, may pose serious safety/fire hazards. It is very
difficult to gauge the extent of deterioration, fatigue, or
weakening of the parts listed below simply by visual inspection
alone. For this reason, replace these parts at the intervals
shown in the table below. However, if any of these parts are
found to be defective, replace before starting operation,
regardless of the interval.
Also, when replacing hoses, check the clamps for deformation,
cracks, or other deterioration, and replace as necessary.
Be sure to perform periodic inspection of all hoses, as shown
below, and replace or retighten any defective parts found, as
necessary.
Consult your authorized dealer for correct replacement.
Hydraulic
System
NOTE: Be sure to replace seals, such as O-rings and
gaskets, when replacing hoses.
MAINTENANCE
Periodic Replacement Parts
Boom cylinder line hose
Front
Arm cylinder line hose
Attachment
Attachment cylinder line hose
8-5
Replacement
Intervals
Every 2 years
Every 2 years
Every 2 years
Advertisement
Table of Contents
