Grease And Hydraulic Oil - Hitachi ZAXIS 210LC-3 Operator's Manual

GREASE AND HYDRAULIC OIL

Brand Names of Recommended Grease
Where to be Bucket, Arm and Boom, Swing Gear,
applied Swing Bearing, etc.
Manufacturer
–20 to 40 °C (–4 to 104 °F)
Nippon Koyu SEP 2
British Petroleum BP Energrease
Caltex Oil Multifax
Esso Beacon
Idemitsu Kosan Daphne Coronex Grease EP2
Mobil Oil Mobilux
Nippon Oil Epinoc Grease
Shell Oil Shell Alvania
NOTE: The machine shipped from the factory is filled with lu-
bricants marked with
X1 Front Joint Pin and Swing Bearing
X2 Swing Gear
Brand Names of Recommended Hydraulic Oil
Kind of Lubricant
Where to be applied
Change Interval
Environmental
Temp.
Manufacturer
Hitachi
Idemitsu Kosan
British Petroleum
Caltex Oil
Texaco INC.
Chevron U.S.A INC.
Esso
Mobil Oil
Shell Oil
Remarks
NOTE: Use proper hydraulic oil in accordance with the atmospheric temperature.
The machine shipped from the factory is filled with oil marked
When the atmospheric temperature is between -40°C and +20°C: Use the proper hydraulic oil having high and low
temperature characteristics by referring to the values shown below.
Low Temperature Viscosity: Less than 4000cSt at -40°C
High Temperature Viscosity: More than 6.5cSt at +80°C
The above values are approximately equivalent to ISO viscosity grade #22. However, low temperature viscosity will
differ depending on each product. Contact each hydraulic oil manufacture directly.
When the atmospheric temperature is below -40°C: Contact your authorized dealer.
.
5000 hours
–20 to 40°C –10 to 40°C
(–4 to 104°F) (14 to 104°F)
Super EX 46HN
MAINTENANCE
X1
LS-EP2
EP2
EP2
EP2
AP2
EP2 X2
Hydraulic Oil
Hydraulic System
2500 hours
–20 to 40°C –10 to 40°C
(–4 to 104°F) (14 to 104°F)
Super Hydro 46 WRHU
Tellus Oil S46
Anti-wear type hydraulic oil
8-6
1500 hours
–20 to 40°C
(–4 to 104°F)
Bartran HV46
.
–10 to 40°C
(14 to 104°F)
Rando Oil
HD46
Rando Oil
HD46
Chevron AW46
NUTO H46
DTE 25
Tellus Oil 46