Definitions: Safety Guidelines - DeWalt DCF801N Original Instructions Manual

SUBCOMPACT IMPACT DRIVER
DCF801
SUBCOMPACT IMPACT WRENCH
DCF902
Congratulations!
You have chosen a D WALT tool. Years of experience, thorough
E
product development and innovation make D
most reliable partners for professional power tool users.
Technical Data
Voltage
Type
Battery type
Power output
No-load speed
Precision Mode
Lo Mode
Hi Mode
Impact rate
Max. torque
Tool holder
Weight (without battery pack)
Noise values and vibration values (triax vector sum) according to EN62841-2-2:
L (emission sound pressure level)
PA
L (sound power level)
WA
K (uncertainty for the given sound
level)
Vibration emission value a =
h
Uncertainty K =
The vibration emission level given in this information sheet has
been measured in accordance with a standardised test given in
EN62841 and may be used to compare one tool with another. It
may be used for a preliminary assessment of exposure.
WARNING: The declared vibration emission level
represents impact tightening of fasteners of the maximum
capacity of the tool. However if the tool is used for
different applications, with different accessories or poorly
maintained, the vibration emission may differ. This may
significantly increase the exposure level over the total
working period.
An estimation of the level of exposure to vibration should
also take into account the times when the tool is switched
off or when it is running but not actually doing the job.
This may significantly reduce the exposure level over the
total working period.
WALT one of the
E
DCF801 DCF902
V 12 12
DC
1 1
Li-Ion Li-Ion
W 200 200
-1
min 0–950 0–2850
-1
min 0–1950 0–1000
-1
min
0–2850 0–2850
min -1 0–3600 0–3600
Nm 163 168
mm 6.35 3/8"/9.5
kg 0.8 0.8
dB(A) 90 90
dB(A) 101 101
dB(A) 3 3
2
m/s 6.7 7.8
2
m/s 1.5 1.8
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool
and the accessories, keep the hands warm, organisation of
work patterns.
EC-Declaration of Conformity
Machinery Directive
Sub-Compact Impact Driver
DCF801
Sub-Compact Impact Wrench
DCF902
WALT declares that these products described under Technical
D
E
Data are in compliance with:
2006/42/EC, EN62841-1:2015, EN62841-2-2:2014.
These products also comply with Directive 2014/30/EU and
2011/65/EU. For more information, please contact D
the following address or refer to the back of the manual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of D
Markus Rompel
Vice-President Engineering, PTE-Europa
D WALT , Richard-Klinger-Straße 11,
E
D-65510, Idstein, Germany
21.01.2019
WARNING: To reduce the risk of injury, read the
instruction manual.

Definitions: Safety Guidelines

The definitions below describe the level of severity for each
signal word. Please read the manual and pay attention to
these symbols.
DANGER: Indicates an imminently hazardous
situation which, if not avoided, will result in death or
serious injury.
WARNING: Indicates a potentially hazardous situation
which, if not avoided, could result in death or
serious injury.
CAUTION: Indicates a potentially hazardous situation
which, if not avoided, may result in minor or
moderate injury.
ENGLISH
WALT at
E
WALT .
E
5