Playback your Recordings
Playback using the PlayPak
Remove the Battery Compartment lid
and insert the AA size battery.
* Make sure polarities are aligned properly.
* When tape loading and unloading time
becomes longer than normal, battery replace-
ment is necessary.
1 Turn the Tape Wheel on the IVHS[&
cassette in the direction of the
arrow to reduce any slack.
2 Slide the RELEASE button in the
direction of the arrow to open the
PiayPak door.
3 Insert the (VHSIH cassette with the
window facing up and to the left.
Then, snap the lid shut.
* Let the Load Detector fully retract before
using the PlayPak in your standard VHS
VCR.
* Be sure the cassette reel area under the
PlayPak is free to turn while loading.
Load Detector
Remove ШС
Cassette
1 Slide the RELEASE button and wait
for the lid to open.
2 Hold the PlayPak securely in one
hand. Put your finger through the hole
in the bottom of the PlayPak and push
the cassette out.
24