Advertisement
(3) HEADPHONE Jack
ot
G) tindersean Switch —
Sone peta) serene ON eel
rood
Ot OO
Osr SEI
42) COLOR Control
easily touched up.
@ POWER/VOL Control
1. Turn clockwise to turn the monitor on.
Turn counterclockwise to turn the monitor off.
2. Adjust this control
() Power Indicator
The
Power
Indicator
will
light when
the monitor
is
turned on.
(4) Undersean Switch ( ©) )
Decreases
the overall picture size to allow the corners
to be seen.
&) Pulse Cross Switch ( 6 )
Receives
cross
pulse to allow vertical and horizontal
syncs to be seen in the picture.
6) BLUE Only Switch
( BLUE }
Defeats the red and green signals. This feature is used
_ for monitor balancing with the SMPTE color bar signal.
@) COMB/TRAP Switch
Push the COMB/TRAP
Switch for trap filter function.
Push again for comb filter function.
V-HOLD Control
Adjust the V-HOLD
control
if the picture rolls up or
down.
|
@ CONTRAST Control!
Adjust the contrast level for proper overall contrast.
There is aclick position for normal level.
BRIGHTNESS Control
Adjust Brightness level for proper overall picture bright:
ness.
There is a click position for normal level.
Gd) TINT Control
|
_ Adjust the Tint control for proper chroma phase of flesh
tones.
.
2) COLOR Control
Adjust the Color contro! to set the chroma (saturation)
level.
(3) HEADPHONE Jack
Audio may be monitored by the headphones using this
jack (monaural sound).
Advertisement
