Hotwire Reachdsl System - Paradyne Hotwire 6390 Installation And Operation Manual

Hotwire ReachDSL System

Copper pairs run from the central office (CO) to the customer premises (CP) to
create the local loop. The local loop terminates on the customer premises at the
demarcation point.
6390-A2-GK40-00
Central
Office
(CO)
Local Loop
Network
Service
Provider Demarcation
(NSP) Point
DSL – Digital Subscriber Lines
POTS – Plain Old Telephone Service
NOTES:
In this document:
— A telephone is used to represent any equipment that plugs into a phone
jack and uses the POTS line, such as a phone, modem, or fax machine.
— End-user system is used to represent any PC with an Ethernet connection
and ReachDSL-based service.
— RJ11 wall jack is used to represent either an RJ11 or an RJ14 wall jack.
The RJ14 wall jack is used for a phone with two lines.
— Service provider is used to represent any Internet Service Provider (ISP)
or remote LAN access provider.
September 2002
Customer Premises (CP)
Filter
ReachDSL
Modem
DSL/POTS
Standard Standard
Ethernet Ethernet
Cable Cable
or
Hub
End-user
Systems
02-17237
3