Table of Contents
Advertisement
Hotwire 6390 ReachDSL Modem Commands
The Hotwire 6390 ReachDSL Modem provides the commands listed in
Hotwire ReachDSL 6390 Modem
Ethernet jack on the rear panel of the modem or Telnet into the modem to enter
these commands.
Table 1. Hotwire ReachDSL 6390 Modem Commands (1 of 2)
Command Syntax
help {all <command>}
info
logoff
mgmtpvc {dhcp <IP address>
<gateway>}
password [<login>] <password>
ping
reset
10
Argument Function
T
No argument
T
all
T
command
None
None
T
No argument
T
dhcp or ip address
– dhcp
Example: mgmtpvc dhcp
– IP address gateway
Example: mgmtpvc
135.26.95.1 135.26.95.6
T
login
Example: password user user
T
password
Example: password secret
T
<IP address>
Example: ping 135.26.12.254
None
September 2002
Commands. Use a PC connected to the
Description
Displays help information.
T
Displays a list of all valid commands
T
Displays a list of all valid commands and
their syntax
T
Displays syntax for command
Displays device information.
T
Model Number
T
Serial Number
T
Firmware Revision
T
Hardware Revision
T
DSP Revision
Terminates the Telnet session.
Configures or displays the management PVC.
T
Current configuration
T
Configures the management PVC:
– The management PVC acquires its
address using DHCP
– The management PVC is configured for
the specified IP address and gateway
Configures the modem's password(s).
T
Only available to "admin" users. Can either
be "admin" (default) or "user"
T
password
Only available to "admin" users. Initiates a ping
to the specified IP address and displays
results.
T
An IP address must be specified
Resets the unit.
Table 1,
6390-A2-GK40-00
Advertisement
Table of Contents
