Table of Contents
Advertisement
3-8
Installing the PCI Expansion Card
• The PCI riser assembly does not include a riser card or any cabling as standard. To install
a PCI card, a riser card must be installed.
Follow these instructions to install the left PCI Expansion card:
1.
To open the upper tray.( See Section 3-3)
2.
Remove the screw securing the riser bracket to the system.
3.
Lift up the riser bracket out of system.
4.
Remove the screw securing on the riser bracket and remove the PCI bracket.
5.
Align the PCIcard to the riser guide slot and push in the direction of the arrow until the PCI card sits
in the PCI card connector.
6.
Secure the PCI card with a screw.
7.
Reverse steps 1 - 4 to install the riser bracket back into the system
2
2
2
3
4
System Hardware Installation
- 31 -
1
5
6
Advertisement
Table of Contents
