Table of Contents
Advertisement
2-3
Front Panel LEDs and Buttons
No. Name
Power button
1.
with LED
2.
ID LED
(Note)
System Status
3.
LED
(Note)
ID Button
4.
with LED
(Note) If your server features RoT function, please see the following section for detail LED behavior.
3
1
Color
Status
Green
On
Green
Blink
N/A
Off
Blue
On
N/A
Off
Green
Solid On System is operating normally.
Solid On Critical condition, may indicate: System
Amber
Blink
N/A
Off
Blue
On
N/A
Off
System Appearance
4
2
Description
Indicates the system is powered on.
System is in ACPI S1 state (sleep mode).
- System is not powered on or in ACPI S5 state (power off)
- System is in ACPI S4 state (hibernate mode)
Indicates the system identification is active.
Indicates the system identification is disabled.
fan failure System temperature
Non-critical condition, may indicate: Redundant
power module failure Temperature and
voltage issue Chassis intrusion
System is not ready, may indicate: POST error
NMI error Processor or terminator missing
Indicates the system identification is active.
Press the button to activate system identification
Indicates the system identification is disabled.
- 15 -
Advertisement
Table of Contents
