Openning And Closing The Hard Drive Upper Tray - Gigabyte TO25-Z11-AA01 User Manual

Orv3 compute node amd epyc 9004 - 2ou 2-node up 12-bay e1.s gen4 nvme, orv3 node tray - 2ou 2-node
Table of Contents

Advertisement

3-5

Openning and closing the Hard Drive Upper Tray

Read the following guidelines before you begin to install the Hard Drive Upper Tray:
• Take note of the drive tray orientation before sliding it out.
• The tray will not fit back into the bay if inserted incorrectly.
• Make sure that the HDD is connected to the HDD connector on the backplane.
Follow these instructions to open the Hard Disk Drive Upper Tray:
1.
Press the release latch of the tray.
2.
Flip over the Upper tray.
2
System Hardware Installation
- 24 -
1

Advertisement

Table of Contents
loading

This manual is also suitable for:

To25-bt0To25-z11

Table of Contents