Philips HX9992/02 Manual page 20

20
English
Charging with the travel case
1
2
Battery Status (when handle is on a working charger or travel
case)
Battery status
Charging
1 Plug the USB cord into the travel case and into the
USB wall adapter.
2 Plug the wall adapter into an electrical outlet.
3 Place toothbrush into travel case.
a To indicate charging has started successfully, the
toothbrush will beep twice and the lights will
illuminate in an upward motion.
b While charging the battery indicator blinks in
white.
4 Leave travel case plugged in until toothbrush is fully
charged. The battery light will turn off (stop blinking)
when the handle has finished charging.
Note: Make sure the travel case is placed on its side for
better stability.
When the handle is placed on the charger or in the travel
case, the battery indication will communicate the battery
level.
Battery indication
Blinks in white