Philips HX9992/02 Manual page 14

14
English
2
1
3
4
6
5
Brushing modes
Intensity settings
6 To clean the inside surfaces of the front teeth, tilt the
brush handle semi-upright and make several vertical
overlapping brushing strokes on each tooth.
7 The BrushPacer divides the brushing time into six
equal segments and indicates when you should move
to the next area. Segments are indicated with a brief
pause in vibration. The toothbrush automatically
stops at the end of the brushing session.
Note: Your Philips Sonicare toothbrush is safe to use on
braces, dental modifications and dental restorations
(fillings, crowns, veneers)
Your power toothbrush comes pre-set to the all-in-one
clean mode that provides the dentist recommended 2
minute brushing routine, with a six segment brush pacer.
To personalize your brushing mode you can customize
your power toothbrush settings from the Sonicare app
(see 'Sonicare App - Getting Started').
Note: Although a mode is not displayed on the
toothbrush handle, you can update the mode any time
from the Sonicare App and your selection will be stored.
Your power toothbrush comes with 3 different intensity
settings:
- High intensity (three lights)
- Medium intensity (two lights)
- Low intensity (one light)