Flight Mode; Software Update; Check Memory - LG KP330 User Manual

Settings
9. Connecting a handsfree kit
1. Menu ❏ Settings ❏ Connection ❏
Bluetooth
2. Connect the handsfree kit according to
the procedures described in the Pairing
Devices section.
3. To use the handsfree kit, select the
handsfree kit from the registered devices,
then press the OK key [Connect].
The Bluetooth
owned by the Bluetooth SIG, Inc. and any
use of such marks by LG Electronics is
under license. Other trademarks and trade
names are those of their respective owners.
Note
KP330 does not support IrDA port.
10. Using Supported service / Primary
Storages
You can view the list of devices such as
headsets and handsfree kit supported by
this Bluetooth enabled phone. You can also
select the primary storage.
72
® word mark and logos are

Flight Mode

If you activate the Flight mode, you can
use the phone without connecting the 3G
wireless network. 3G wireless phone and
RF signal from the phone connections are
prevented, but you can still do tasks which
do not require the use of wireless network.
With flight mode you cannot make any
calls including emergency calls or use other
features that require network service.

Software Update

This menu is used to resume a postponed
software update. This feature is dependent
on network. If new software exists, the
server notifies devices using a WAP push
message. You can update the software of
your phone using this function.

Check Memory

This function shows the usage of the
memory of the mobile phone that can be
used to save user data.
User data is saved in a FLASH memory, a
type of nonvolatile memory, keeping saved
data permanently unless the data are
deleted by user.
Menu 9.8
Menu 9.9
Menu 9.0