Usb Connection Mode - LG KP330 User Manual

USB Connection Mode

Select the desired USB connection mode:
Mass Storage, Data Service.
Using your phone as a modem
Your KP330 can double as a modem for
your PC, giving you email and internet
access even when you can't connect using
wires. You can use either the USB cable
or Bluetooth.
Using the USB cable:
1. Ensure you have the LG PC Suite
installed on your PC.
2. Connect your KP330 and your PC using
the USB cable and launch the LG PC
Suite software.
3. Click Communication on your PC. Then
click Settings and select Modem.
4. Choose LG Mobile USB Modem and
select OK. It will now appear on screen.
5. Click Connect and your PC will connect
through your KP330.
Using Bluetooth:
1. Ensure Bluetooth is switched On and
Visible for both your PC and KP330.
2. Pair your PC and KP330 so that a
passcode is required for connection.
3. Use the Connection wizard on your LG
(Menu 9.7.3)
PC Suite to create an active Bluetooth
connection.
4. Click Communication on your PC. Then
click Settings and select Modem.
5. Choose Standard Modem over Bluetooth
link and select OK. It will now appear
on screen.
6. Click Connect and your PC will connect
through your KP330.
Network
Network Selection: You can select
❖
either Automatic or Manual network
selection.
1. If you select Automatic, connection
2. If you select Manual, all the currently
(Menu 9.7.4)
continues according to the Automatic
network selection procedures. This
setting is recommended for best
service and quality.
2G (GSM) and 3G (UMTS) available
networks are shown, and you can
select one of them for registration. If
the registration of the network has
failed, then all the currently available
networks are listed again, and you can
select any other one for registration.
67