Sony Handycam CCD-TR700 Operation Manual page 61

Installing the size AA (R6) Batteries into the Remote Commander
To use the Remote Commander, you must install two size AA (R6) batteries. Use the supplied size AA
(R6) batteries.
(1)
Remove the battery cover from the Remote Commander.
(2)
Install both of the size AA (R6) batteries
with correct polarity.
(3)
Put the battery cover back onto the Remote Commander.
r
1 2 3
v\
V\
Battery Life
The batteries for the Remote Commander last about 6 months under normal operation. When the
batteries become weak or dead, the Remote commander does not work.
To avoid damage from possible battery leakage
Remove the batteries when you will not use the Remote Commander for a long time.
Remote Control Direction
Notes on the Remote Commander
• Keep the remote sensor away from strong light sources such as direct sunlight or illumination.
Otherwise, the remote control may not be effective.
• Be sure that there is no obstacle between the remote sensor and the Remote Commander.
• This camcorder works at commander mode VTR 2. The commander modes (1,2 and 3) are used to
distinguish this camcorder from other Sony VCRs to avoid remote control misoperation. If you use
another Sony VCR at commander mode VTR 2, we recommend you change the commander mode or
cover the remote sensor of the VCR with black paper.