Sony Handycam CCD-TR700 Operation Manual page 31

Setting White Balance Mode
(
1
)
Open the AUTO LOCK cover until it clicks.
(
2
)
Press WHT BAL repeatedly so that the desired mode
indicator appears in the viewfinder and display window.
Locking the White Balance Setting (HOLD mode)
When you set the white balance to HOLD mode, the last automatic white balance setting will be locked
and maintained even if lighting conditions change.
(
1
)
Close AUTO LOCK cover.
(
2
)
Point the camcorder at a white and flat object such as a white wall or
paper for about 15 seconds.
(
3
)
Open AUTO LOCK cover.
(
4
)
Press WHT BAL repeatedly so that the
HOLD indicator appears in the viewfinder and display window.
Note on the HOLD mode setting
When you detach the battery or change white balance mode, the setting you made for HOLD mode is
canceled.
To Return to Automatic White Balance Mode
Press WHT BAL repeatedly until the white balance indicator disappears, or close AUTO LOCK cover.