Tape Playback; Basic Playback; To Stop Play; Tape Counter Reset - Zenith LX-230A Installation And Operating Manual

Tape Playback

You can use only normal tape.

Basic Playback

Press TAPE to select tape function.
1 1
("NO TAPE" appears in the display window.)
Open cassette deck by pushing
2 2
PUSH EJECT position.
3 3
Insert a cassette with the tape side to the
bottom and then close deck.
Press PLAY ( or : OPTIONAL).
4 4

To Stop Play

Press STOP( ) during playback.

Tape Counter Reset

Press COUNTER RESET(COUNTER) during
playback.
Playing time appears "TP - 0000" in display window.

Recording

Wind the tape to the point recording starts. (Use only normal tapes.)

Basic Setting

Select the function (CD, TUNER/BAND or AUX)
1 1
you want to record.
Open the cassette deck and insert a blank
2 2
cassette into the cassette compartment.
To set the recording direction :OPTIONAL
Press PLAY MODE repeatedly to set the
recording direction.
Recording from Radio, CD or Auxiliary
source
Press on the front panel or the remote
1 1
control and then select the CD, TUNER or AUX
function.
" REC" flashes and holds the cassette in pause
mode.
Press or PLAY(
2 2
the remote control.
The recording begins.
12

To Play Rewind or Fast Forward

After pressing
or
or stop, press PLAY(
AUTO STOP DECK
After auto stop deck plays only front side, the unit stops
automatically.
AUTO REVERSE DECK:OPTIONAL
You can select direction of the cassette you want by
pressing PLAY MODE.
Pressing
To pause recording
Press
- " REC" flashes in display window.
To stop recording
Press TAPE STOP(

CD to Tape Synchronized Recording

The CD synchro recording function dubs a complete CD
and programmed titles automatically into a cassette.
1 1
2 2
) on the front panel or
/
on the remote control during playback,
/
) at the point you want.
Display
After the cassette plays front or reverse
Once
(backward play) side, stops automatically.
After the cassette plays front and
Twice
reverse side, stops automatically.
After the cassette plays six times
Three
repeatedly front and reverse side,
times
stops automatically.
during recording.
).
Press CD SYNC. in stop mode.
" REC" flashes and "
display window.
The synchronized recording is started
automatically after about 8 seconds.
otes
If you wish to record from the desired track, select the
desired track with CD SKIP/SEARCH (
) before commencing CD synchro recording.
The function change is not possible during recording.
on the front panel
Function
" displays in the
/