Table of Contents
Advertisement
Tape Playback
You can use only normal tape.
Basic Playback
Press FUNCTION repeatedly to appear TAPE
1 1
indicator.
("NO TAPE" appears in the display window.)
Open cassette deck by pushing
2 2
PUSH EJECT position.
3 3
Insert a cassette with the tape side to the bot-
tom and then close deck.
Press PLAY
.
4 4
To Stop Play
Press STOP( ) during playback.
Tape Counter Reset
Press COUNTER during playback.
Playing time appears "TP - 0000" in display window.
Recording
Wind the tape to the point recording starts. (Use only normal tapes.)
Basic Setting
Press FUNCTION repeatedly to appear the CD
1 1
or TUNER indicator.
Open the cassette deck and insert a blank
2 2
cassette into the cassette compartment.
Recording from Radio, CD or Auxiliary
source
Press
REC
(or
1 1
control), and then play the CD or TUNER
function.
" REC" flashes and holds the cassette in pause
mode.
Press
REC
or PLAY(
2 2
PLAY(
) on the remote control).
The recording begins.
To pause recording
Press
REC
or
again.
" REC" flashes in display window.
To stop recording
Press TAPE STOP(
).
To Play Fast Rewind or Fast Forward
After pressing
remote control during playback, press PLAY (
the point you want.
AUTO STOP DECK
After auto stop deck plays only front side, the unit stops
automatically.
CD to Tape Synchronized Recording
The CD synchro recording function dubs a complete CD
and programmed titles automatically into a cassette.
1 1
2 2
on the remote
) (or
or
on the front panel or the
/
Press CD SYNC. in stop mode.
" REC" flashes and "
display window.
The synchronized recording is started
automatically after about 8 seconds.
Notes
If you wish to record from the desired track, select the
desired track with SKIP
/
ing CD synchro recording.
The function change is not possible during
recording.
) at
" displays in the
before commenc-
13
Advertisement
Table of Contents
