Table of Contents
Advertisement
Audio/Sound Setup
Selecting Bilingual Signal (Second
Selecting Bilingual Signal (Second
On-screen display in stereo mode
On-screen display in bilingual mode : SAP
* Bilingual (second audio program) signal
This signal contains the secondary language signal in addition to the primary language.
There are primary and secondary language and stereo modes in bilingual signals.
[MONO] : The primary language is heard from left and right speakers in mono sound.
[STEREO] : The primary language is heard from left and right speakers in stereo sound.
[SAP] : The secondary language is heard from both left and right speakers in mono sound.
Use the
mts
button to select MTS mode.
1
MTS
Mono
2
Use the
mts
button or volume (
change the audio mode.
Each press of volume (
audio mode as shown below.
Mono
Stereo
3
Press the
enter
(
* Select sound mono mode if the signal is not clear or in poor signal reception areas.
* STEREO and MONO modes are available only if included on the broadcast signal.
46
: STEREO
F F G G
) buttons to
F , G
F , G
) buttons changes the
SAP
A
) button.
Audio Program)
Audio Program)
206-3779
Advertisement
Table of Contents
