Table of Contents
Advertisement
PC Mode Adjustments
4
Press the volume (
to make appropriate adjustments.
PC
G G
H-Position
G G
V-Position
G G
Clock
G G
Phase
G G
Auto configure
G G
Reset
Adjust
A
Back
F F G G
H-Position/V-Position
This function adjusts picture left/right and up/down.
The adjustment ranges are -100~+100 / -30~+30.
Clock
This function minimizes any vertical bars or stripes appearing on the screen background.
The adjustment range is -30~+30.
Phase
This function allows you to remove any horizontal noise and clear up or sharpen the character images.
The range adjustment is -15~+15.
Auto-configure
This function is for the automatic adjustment of the screen position, clock and clock phase.
(The displayed image will disappear for a few seconds while Auto-configuration is in progress.)
Reset
This function allows you to return to the default setting programmed at the factory; default settings
cannot be changed.
5
Press the
enter
(
* Some signals from some graphics boards may not function properly. If the results are unsat-
isfactory, adjust your monitor's position, clock and clock phase manually.
* If you turn on PIP, you cannot access PC setup. If you need to adjust PC setup, turn off PIP
first.
22
G
) and then use the volume (
0
A
) button.
F , G
) buttons
206-3779
Advertisement
Table of Contents
