Advertisement
SL-P2000 |
Ref.No.
14
Procedure
1-14
Removal of the clamp plate ass'y
Ee
prciletie of the yoke, magnet and
Procedure
114-15
Clamp plate ass'y
\
Claw with projection
1.While lifting the claw with a screwdriver, rotate yoke in the
direction of arrow and remove the yoke and magnet.
2.Release the 3 claws of the clamper.
Procedure
1-3-—-10-14
1. Turn the pulley gear in the direction of arrow @ until the
traverse unit comes down.
¢ Remove the rotation lever ass'y in the directions of
arrow@),@,@.
2. Pull the disc tray ass'y in the direction of arrow@.
3. Remove the 3 screws( @ ~ @).
4. Remove the disc tray ass'y in the direction of arrow@, @.
Advertisement
