Fault
Remnants of food on
tableware.
Cause and troubleshooting
Tableware is placed too close together or basket is
overfilled.
Arrange tableware with sufficient space in between.
1.
The spray jets must reach the surfaces of the table-
ware.
Avoid points of contact.
2.
Spray arm rotation is blocked.
Arrange tableware so that it does not obstruct
▶
spray arm rotation.
Spray arm nozzles are blocked.
Clean the Spray arms → Page 41.
▶
Filters are soiled.
Clean the filters.
▶
→ "Cleaning filters", Page 40
Filters are inserted incorrectly and/or not engaged.
Insert the filters properly.
1.
→ "Filter system", Page 40
Engage the filters.
2.
Washing programme selected too weak.
Select a more intensive washing programme.
▶
→ "Programmes", Page 17
Tableware has been precleaned too intensely. The
sensors chose a weaker programme. Stubborn soiling
cannot be entirely removed.
Only remove large remnants of food and do not
▶
prerinse tableware.
Tall narrow receptacles in corner areas are not rinsed
adequately.
Do not position tall narrow receptacles at too great
▶
an angle or in corner areas.
Top baskets on right and left are not set to same
height.
Set the upper basket on the left and right to the
▶
same height.
→ "Top basket", Page 19
Troubleshooting en
45