Bosch SPV2HKX42G Information For Use page 35

Basic setting
Remote Start
Factory setting
1
Factory setting (may vary according to model)
Setting Extra Dry
Press ⁠ .
1.
To open the appliance settings,
2.
press
flashes.
a
Press
3.
and flash.
Press repeatedly until the
4.
LEDs show the right value.
If LED A is not lit up, Extra Dry is
switched off.
If LED A is lit up, Extra Dry is
switched on.
To save the settings, press
5.
for 3 seconds.
Selection
Scale with 3 levels
Reset
for 3 seconds.
repeatedly until
A
Description
Activate or deactivate the
function.
→ "Activating Remote
Start
This basic setting is not
available until you have
connected the appliance
with the Home Connect
app.
→ "Home Connect ",
Page 36
Restore changed set-
tings to the factory set-
tings.
The settings for initial
start-up must be con-
figured.
→ "Restoring factory set-
tings", Page 36
Setting signal volume
Press ⁠ .
1.
To open the appliance settings,
2.
press
flashes.
a
Press
3.
and flash.
Press repeatedly until the
4.
right signal volume has been set.
A
0, 1, 2 or 3 LEDs will light up ac-
cordingly. The signal tone selected
will be heard.
The factory setting is level 2 (LED
A and LED B).
To save the settings, press
5.
for 3 seconds.
Basic settings en
", Page 36
for 3 seconds.
repeatedly until
B C
35