S-Video Loop-Out Connections - Zenith H27E55DT Operating Manual

S-Video Loop-out Connections

Use the S-Video Out jack to connect up to four additional TVs in a "daisy-chain".
To use this setup, go to the Channel Preview page listed on page 5.
Setup for Looping-Out the Master TV's S-Video Image to other TVs
1
1. Make connections to the S-Video Out jack on the Master TV.
2
2. Connect S-Video cables to the daisy-chained TV's S-Video input jacks as shown.
3
3. On the "Daisy-chained" TVs, select the S-Video Input for the picture source.
Viewing Sources Note:
Follow instructions supplied with your TV(s) for selecting viewing sources. Picture
should appear on the Master and other TVs connected in series.
Note: S-Video loopout must be
enabled for this feature to work. Refer
to Installation and Setup Guide,
Installer item 33-I, Y/C Loopout.
ABC
206-3740
Typical
TV Back
Component Video Input
Antenna
Pr Pb
Cable
Y
Video In
M.P.I.
S-Video Out S-Video In
ABC
S-Video Loop-out from Master TV to other TVs
Matrix Out
R Audio L
R Audio In L
R Audio In L
ABC
ABC
P A G E 1 7