Picture/Sound Source Selection - Zenith Presentation H27E44DT Installation & Operating Manual

Picture/Sound Source Selection

Make direct connections, use the TV/VCR Source key, or use Channel Up/Down to choose
the available picture and sound sources to appear on the TV screen
#1
Front
(Camport)
Direct Source
Connection
Antenna
Cable
#3
Rear
(Ch_ _)
Selectable
Sources
1
Make direct connection to Front
Audio/Video In, to use this source
when necessary. Disconnect when fin-
ished.
2
To access other available sources
(Antenna/Cable, Rear S-Video In, or
Rear Audio/Video In), press TV/VCR
SOURCE repeatedly to show selectable
sources on the screen.
Note: The rear Audio/Video In jacks
can be selected by keying in 999 on
the remote number keypad.
A direct source connection overrides all other
sources. The front Video In jack is a direct
source connection. If you have a device con-
nected to this jack, you will not be able to
change channels until you have disconnect-
ed the device.
206-3753
S-Video In R- Audio - L
In
#2
Rear
(Y-C)
Video In R- Audio - L
In
#4
Rear
(Aux)
Direct Source Connection, appears on TV screen at hookup
1.
Other Available Sources if
2.
3.
4.
Select 2, 3, and 4 using TV/VCR Source or Channel Up/Down.
Note: Above source priority selection can be changed in the service menu,
see service manual.
TV Back
Matrix
Antenna
Out
Cable
Video
R- Audio - L
In
In
M.P.I.
S-Video
S-Video
Out R- Audio - L
In
In
Front/Rear
Connection Panels
Priority of Source Selection
Front Audio/Video In (No other sources available)
1. Front Audio/Video In has no equipment connected.
Rear S-Video In.
Antenna/Cable
Rear Audio/Video In
Camcorder
VCR
S-Video
DVD
Audio/Video
Other
Typical Accessory
Equipment
P A G E 1 7