Electrolux EW6F6448M5 User Manual page 10

The drain hose should stay at a height of no
less than 60 cm and not more than 100 cm.
It is possible to connect the drain hose in different ways:
min.600 mm
max.1000 mm
Make sure that the drain hose makes a loop
to prevent particles going into the appliance
from the sink.
Connect the drain hose to the spigot and
tighten it with a clamp. Make sure that the
drain hose makes a loop to prevent particles
going into the appliance from the sink.
Position the hose directly to a built-in drain
pipe in the room wall and tighten it with a
clamp.
4. Without the plastic hose guide, to a sink
spigot- Put the drain hose in the spigot and
tighten it with a clamp.
The drain hose can be bent into U shape and
put around the plastic guide. On the edge of a
sink - Fasten the guide to the water tap or to
the wall.
10 ENGLISH
You can extend the drain hose to
maximum 400 cm. Contact the
authorised service centre to buy the other
drain hose and the extension.
Make sure that the plastic guide cannot
move when the appliance drains and the
drain hose end is not immersed in the
water. There may be a return of dirty
water into the appliance. Buy accessories
from authorised supplier.
To a stand pipe with vent hole - Insert the
drain hose directly into a drain pipe or stand
pipe
The end of the drain hose must always
be ventilated , i.e. the inner diameter of
the drain pipe (min. 38 mm - min. 1.5")
must be larger than the external diameter
of the drain hose.