Zenith HealthView H20F50DT Installation And Operating Manual, Warranty page 36

Installer Menus
Installer Menu Items 65-I through 86-I: Detailed Descriptions
65-I. BCK. PTL. M. (V-Chip Menu Background Color)
Set according to Color Chart.
0 = Black 3 = Yellow
1 = Red 4 = Blue
2 = Green 5 = Violet
66-I. NOT USED
67-I. NOT USED
68-I. NOT USED
69-I. EN. CH-T COL.
Set to 1 to enable custom color for the Channel-Time display.
Set to 0 to disable custom color for the Channel-Time display.
70-I. FOR. CH-T COL. (Channel-Time Display Foreground Color)
Set according to Color Chart.
0 = Black 3 = Yellow
1 = Red 4 = Blue
2 = Green 5 = Violet
Note: If foreground and background color are the same, menu
background is transparent.
71-I. BCK. CH-T COL. (Channel-Time Display Background Color)
Set according to Color Chart.
0 = Black 3 = Yellow
1 = Red 4 = Blue
2 = Green 5 = Violet
Note: If foreground and background color are the same, menu
background is transparent.
72-I. NOT USED
73-I. CH NOT AVBLE
When set to 1 and channel override is set to 0, "NOT AVAILABLE"
message is displayed when direct accessing a channel not in the
favorite channel list.
74-I. CH-TIME SIZE
When set to 1 and transparent background is selected for
Channel-Time display, (foreground color = background color and
custom color enabled) a large channel number is displayed
instead of the normal Channel-Time display
75-I. NOT USED
76-I. DEFEAT XDS
Set to 1 to disable XDS display. Set to 0 to enable XDS display.
P A G E 3 6
6 = Cyan
7 = White
6 = Cyan
7 = White
6 = Cyan
7 = White
.
77-I. QUICK SHUTOFF
Allows TV power off to be controlled by the pillow speaker chan-
nel selection button. User would press and hold button down for
time required to have TV turn off. Value Range 0 - 17, each num-
ber represents 1/2 second. For example, if set to 4, TV would turn
off if user held speaker channel button down for 2 seconds.
78-I. UPN MSB
User programmable number, most significant byte readable by
M.P.I. command.
79-I. UPN MSB-1
User programmable number, most significant byte-1 readable by
M.P.I. command.
80-I. UPN MSB-2
User programmable number, most significant byte-2 readable by
M.P.I. command.
81-I. UPN LSB
User programmable number, least significant byte readable by
M.P.I. command.
82-I. CHKSM ERROR
Enforces rigid M.P.I checksum validation.
Set to 1 for validation.
Set to 0 to turn off.
83-I. HANDSHK TIME
Adds an additional delay to the handshake time which is 64
msec, thus relaxing M.P.I. timing requirements to be compatible
with PC based Windows controlled systems, range is 0 - 5.
Set to 0 to retain standard 64 msec delay.
Set to 1 - 5 to increase @ 16 msec additional, the delay up to
144 msec.
84-I. PERMANENT BLK
Allows Parental Control blocking schemes to be permanent by
removing the blocking hours function.
Set to 1 to install Parental Control blocking restrictions perma-
nently.
Set to 0 for user-specified hours control of blocking schemes.
85-I. NOT USED
86-I. NOT USED
206-3853