Table of Contents
Advertisement
Selecting Viewing Sources
Make direct connections, or
use the Ch Preview menu to
choose the available picture
and sound sources: either
tunable channels or the AUX
Source to appear on the TV
screen
Direct Source Selection
Camport
Plug a video cable into the front Video input jack and the TV automati-
cally switches to that input source.
Notes:
• Selectable viewing sources vary depending on the installation
setup for Auto Sense sources in the Service menu.
• Auto Sense sources appear on the TV screen automatically when
they are connected.
A direct source connection overrides all other sources. The front
Video In jack is a direct source connection. If you have a device
connected to this jack, you will not be able to change channels
until you have disconnected the device.
Mini glossary
SOURCE
AUTO SENSE SOURCE
P A G E 1 8
Camcorder
VCR
Audio/Video
Devices
Input(s) providing the picture and sound to the TV.
Input(s) that the TV automatically switches to when connected.
TV Back
M.P.I.
CHANNEL PREVIEW•
5
- - - -
9
- - - -
20
- - - -
32
- - - -
44
- - - -
AUX
- - - -
FM
CH
TO SELECT, ENTER TO QUIT
CC
FOR PARENTAL CONTROL
Ch Preview Menu
In addition to available channels
tuning, the CH PREVIEW menu is
used to access the Video Channel
(AUX Source input on TV back).
VIDEO
MATRIX
IN
OUT
R- AUDIO- L
IN
206-3749
Advertisement
Table of Contents
