Auto Program (Channel Search)
Use Auto Program to specify Antenna or cable service
incoming signal source and automatically store all of the
channels that are found by channel search
1
With the Installer remote control in hand, press the
POWER key to turn on the HealthView TV.
2
Press the MENU key so the Setup menu appears.
3
Using SELECT on the remote control, highlight Auto
Program on the screen.
4
Press a Right or Left ADJ (Adjust) arrow to reach the
Auto Program menu.
5
Using SELECT, choose either Cable TV or Off Air Antenna
on the screen.
6
Press a Right or Left ADJ arrow to begin the Channel
Search.
7
Press ENTER when the channel search is complete.
Auto Program finds channels being received by the TV tuner.
Cable will not work unless the hospital provides a cable service.
Mini glossary
OFF AIR ANTENNA
If the patient can only view over-the-air broadcasts, select Antenna.
CABLE
If you provide cable service to the patients, select Cable.
206-3491-O
POWER
1
1
4
7
0
BED 1
TIMER
3/5
ADJ
4/6
2
3
5
6
8
9
ENTER
7
2
BED 2
MENU
BANK
CH PREVIEW
SELECT
ADJ
P A G E 1 1