Listening To Cassettes - Panasonic RX-ED77 Operating Instructions Manual

Listening to Cassettes
The deck corresponding to the lighted |
deck indicator (1 or 2) can be operated. |
T
OOP
i nr
c
1—ass
n n n
jj
u u
Tapes can be played back either deck 1 or deck 2.
Normal, high position and metal tapes can be used.
Press POWER.
(Only when the batteries are used for the power supply)
Q Press ■ STOP to select the cassette mode.
CD«—»TAPE
(The display changes each time the button is pressed.)
H Press DECK 1
A
or DECK 2
A,
load the tape
and close the lid.
The direction is automatically set to play the top side ((~> is
displayed).
jcj Press ◄ ►.
"FWD" is displayed and play begins. ("REV" is displayed when
play begins while <•£) is displayed.)
£5>: The side which is facing up is played back.
<«3: The reverse side is playback.
To stop play:
Press H.
To listen to the other side of the tape:
Press ◄ ► during playback.
C233
Pressing ◄ ► automatically turns the unit on, and if a tape is in¬
serted, begins play (only when AC power is supplied).
Changing the operation deck
The deck loaded last is automatically selected.
Press DECK 1/2 to select deck 1 or 2. H
Note
• When one deck is fast forwarding or rewinding and tire other is
selected and play begun by pressing ◄ ►, fast forwarding or
rewinding stops.
• When one deck is playing and the other is selected and a/ MH or
v/ K* pressed, play stops.
To reset the tape counter to "000"
(Available only from the remote control)
Press C-RESET. E3
Types of tapes which can be played on this unit:
The unit automatically identifies type of tape.
Normal position/TYPE I
0
High position/TYPE II
o
Metal position/TYPE [V
o