Panasonic RX-ED77 Operating Instructions Manual page 25

Portable stereo cd system
Hide thumbs Also See for RX-ED77:
Table of Contents

Advertisement

Using the Play Timer
To clear the timer function:
Press PLAY TIMER A (or B) when the unit is on to clear the A or IT
display.
To play music after programming: (after step 7)
© Begin play of the desired music source.
Programmed play timer information is retained in the memory
even if the volume or music source is changed when music is
played.
© After playing music, turn the unit off.
• Cassette deck and direction displayed when the unit is turned off
are activated in the play timer. After playing music, check the play
timer deck and direction before turning the unit off.
•When using the play timer with a CD, check the setting of the
random, repeat or programmed play mode before turning the unit
off.
Always turn the unit off before the programmed start time. The timer
does not activate when the unit is turned on.
To change the source or volume of the timer function:
Press PLAY TIMER A or B to clear the
[a]
or
jjf]
indicator and follow
steps 5 to 8.
To use the timer at the same time daily:
Check that
[A]
or |T] is displayed and turn the unit off.
Using the timers A and B separately
Example: Listening to CDs from 7:00 on weekdays and FM
broadcasting from 9:00 on weekends. 0
© Program play timer A for CD play.
© Program play timer B for radio programing.
© Display [7T on weekdays and
B_ on weekends (steps 7 on
page 24).
• [a] and [B] cannot be displayed simultaneously.
25

Advertisement

Table of Contents
loading

Table of Contents